Thiết bị đo lưu lượng khí nén IFM SD9000 Compressed air meter

Thiết bị đo lưu lượng khí nén IFM SD9000 Compressed air meter

• Precise measurement of flow, consumption and medium temperature
• High accuracy, repeatability and measurement dynamics
• For detecting compressed air in industrial use
• With switching output, analog output and pulse output
• Clearly visible numerical display

Specification

Product characteristics
Number of inputs and outputs	Number of digital outputs: 2; Number of analog outputs: 1
Measuring range	20…6835 l/min 0.3…95.3 m/s 1.5…410 m³/h
Process connection	threaded connection R 1 1/2 DN40
Application
Application	for industrial applications
Media	compressed air
Note on media	air quality ISO 8573-1 class 141 class 344
Medium temperature [°C]	0…60
Pressure rating [bar]	16
Pressure rating [Mpa]	1.6
Electrical data
Operating voltage [V]	18…30 DC; (to SELV/PELV)
Current consumption [mA]	< 110
Protection class	III
Reverse polarity protection	yes
Power-on delay time [s]	1
Inputs / outputs
Number of inputs and outputs	Number of digital outputs: 2; Number of analog outputs: 1
Outputs
Total number of outputs	2
Output signal	switching signal; analog signal; pulse signal; IO-Link; (configurable)
Electrical design	PNP
Number of digital outputs	2
Output function	normally open / closed; (configurable)
Max. voltage drop switching output DC [V]	2
Permanent current rating of switching output DC [mA]	250; (per output)
Number of analog outputs	1
Analog current output [mA]	4…20; (scalable)
Max. load [Ω]	500
Pulse output	consumed quantity meter
Short-circuit protection	yes
Type of short-circuit protection	yes (non-latching)
Overload protection	yes
Measuring/setting range
Measuring range	20…6835 l/min 0.3…95.3 m/s 1.5…410 m³/h
Display range	0…8200 l/min 0…114.4 m/s 0…492 m³/h
Set point SP	55…6835 l/min 0.8…95.3 m/s 3.5…410 m³/h
Reset point rP	20…6800 l/min 0.3…94.8 m/s 1.5…408 m³/h
Analog start point ASP	0…5125 l/min 0…71.5 m/s 0…307.5 m³/h
Analog end point AEP	1710…6835 l/min 23.8…95.3 m/s 102.5…410 m³/h
In steps of	5 l/min 0.1 m/s 0.5 m³/h
Volumetric flow quantity monitoring
Pulse value	0.005…4 000 000 m³
In steps of	0.001 m³
Pulse length [s]	0,018…2
Temperature monitoring
Measuring range [°C]	0…60
Display range [°C]	-12…72
Accuracy / deviations
Flow monitoring
Repeatability [% of the measured value]	± 1,5
Accuracy (in the measuring range)	± (3 % MW + 0,3 % MEW) / ± (6 % MW + 0,6 % MEW); (class 141 /; class 344; conditions: installation to DIN ISO 2533; installation in pipes: DN40)
Temperature monitoring
Accuracy [K]	± 2; (medium flow in the limit area of the flow measurement range)
Reaction times
Flow monitoring
Response time [s]	0.1; (dAP = 0)
Damping process value dAP in steps [s]	0 – 0,2 – 0,4 – 0,6 – 0,8 – 1
Software / programming
Parameter setting options	Flow monitoring; quantity meter; Preset counter; Temperature monitoring; hysteresis / window; normally open / closed; current/pulse output; display can be rotated and switched off; Display unit; totalizer
Interfaces
Communication interface	IO-Link
Transmission type	COM2 (38,4 kBaud)
IO-Link revision	1.1
SDCI standard	IEC 61131-9 CDV
Profiles	no profile
SIO mode	yes
Required master port class	A
Process data analog	3
Process data binary	2
Min. process cycle time [ms]	4.1
Supported DeviceIDs	Type of operation DeviceID default 269
Operating conditions
Ambient temperature [°C]	0…60
Storage temperature [°C]	-20…85
Max. relative air humidity [%]	90
Protection	IP 65
Tests / approvals
EMC	DIN EN 61000-6-2 DIN EN 61000-6-3
CPA approval	model number 002TG accuracy class – maximum allowable error ± 4 % FS Q (min) 1,4 m³/h Q (t) – Q (max) 410 m³/h
Vibration resistance	DIN EN 68000-2-6 5 g (55…2000 Hz)
MTTF [years]	227
Pressure equipment directive	sound engineering practice; can be used for group 2 fluids; group 1 fluids on request
Mechanical data
Weight [g]	4004
Material	PBT-GF20; NBR; PC; stainless steel (1.4301 / 304); PTFE; brass coated; aluminum powder-coated
Materials (wetted parts)	stainless steel (1.4301 / 304); FKM; ceramics glass passivated; PEEK GF30; polyester; aluminum
Process connection	threaded connection R 1 1/2 DN40
Displays / operating elements
Display	Display unit 5 x LED, green (Nl/min, Nm³/h, Nm/s, Nm³, °C) Function display 1 x LED, green Switching status 2 x LED, yellow Measured values alphanumeric display, 4-digit Programming alphanumeric display, 4-digit
Remarks
Remarks	MW = Measured value MEW = Final value of the measuring range Measuring, display and setting ranges refer to standard volume flow according to DIN ISO 2533. For information about installation and operation please see the operating instructions.
Pack quantity	1 pcs.
Electrical connection
Connection	Connector: 1 x M12; coding: A
ifm efector, inc. • 1100 Atwater Drive • Malvern • PA 19355 — We reserve the right to make technical alterations without prior notice. — EN-US — SD9000-02 — 25.06.2013 —